Kootenay Drills 146 gpt Silver eqv Over 234m as 10,000 Meter Drill Program Concluded; Major 25,000 Meter Multi-Phase In-Fill Drilling and Resource Definition Program to Commence at Promontorio Silver ProjectBy Kootenay Gold Inc., PRNE
Monday, May 30, 2011
VANCOUVER, May 31, 2011 -
- Shares Outstanding: 44,923,100
Kootenay Gold Inc. TSX.V: KTN ("Kootenay") is pleased to announce it has
successfully concluded the final holes of its 10,000 meter drill program on
its Promontorio Silver project in Sonora, Mexico, highlighted by a 234 meter
intersection grading 146 gpt silver equivalent*. Based on the success of the
10,000 meter program Kootenay reports it has entered into a contract with BDW
Drilling to immediately commence a minimum 25,000 meter multi-phase diamond
drill program at Promontorio. The in-fill drilling and resource definition
program will be the Company's single largest and most expansive drill
campaign ever conducted at Promontorio.
*See 10,000 meter drill highlights below - Visit
www.kootenaygold.ca for complete Drill Results and Map
States James McDonald, President and CEO of Kootenay: "Hitting excellent
grades of silver mineralization over a broad 234 meter intersection is
further testimony to the success of our 10,000 meter drilling program on
Promontorio. Paramount to its success, we confirmed that high and medium
grade silver occurs along the entire 1.0 kilometer long mineralized corridor
that hosts the current resource. Equally important broadly spaced holes
indicate continuity of silver mineralization over 300 meters of strike in the
North East Zone, which is double the strike length of our current 43-101
25,000 Meter Multi-Phase Drilling Program to Commence
Kootenay reports final mobilization is underway in preparation for the
current multi-phase program. Drilling is scheduled to commence with two
drills June 2, 2011 and will continue into the fall 2011. With the planned
addition of a third rig, a total of three diamond core drills will be working
on site and a minimum of 25,000 meters of drilling is budgeted. The program
is designed to substantially expand the current 43-101 resource conducted on
the project by AGP Mining Consultants in 2010. Included in the program will
be extensive infill and step out drilling to define continuity between silver
intercepts and to test the limits of silver mineralization.
Further adds McDonald "Clearly, the upcoming 25,000 meter drill program
is a major step forward and a much anticipated milestone in the development
of Promontorio. A primary focus for the program will be to dramatically boost
the size of our current silver resource with in-fill and step out drilling
within multiple zones of widespread silver mineralization identified outside
of the Pit Resource along Promontorio's 1.0 kilometer long mineralized
corridor. More than 55 holes will be dedicated to these areas."
Drilling will test new areas of mineralization and test the current
resource boundaries at depth where previous drilling bottomed out in silver
mineralization. Infill drilling will also focus on establishing the
continuity and size of the high and medium grade silver domains now
established within and outside of the silver resource.
Updated NI 43-101 Resource Calculation to Commence at Conclusion of
Kootenay reports an updated NI 43-101 resource calculation on Promontorio
is planned to commence at the conclusion of the program. In anticipation of
further advancing the development of Promontorio, the Company reports
preliminary work for baseline, further metallurgical and scoping studies will
be initiated concurrent with the drilling program.
Highlights of Mineralized intercepts include:
*Note: PC denotes RC holes and DH denotes core holes. All holes should be
taken in context of their locations which are given in table and map form on
the Company website. All silver equivalent values are calculated using silver
+ lead + zinc at US$15.00/ oz, US$0.97/lb. Pb and US$0.91/lb. Zn respectively
Highlights of final holes of 10,000 meter drill program include:
- 234 meters of 146 gpt Ag equivalent including; 70 meters of 236.3 Ag
equivalent including 27 meters of 338.6 gpt Ag equivalent or 121.7 gpt Ag and
5.50 % Pb +Zn.
- 10.5 meters of 174.2 gpt Ag equivalent or 64.1 gpt Ag and 2.57 % Pb
- 92 gpt Ag equivalent over 90 meters including 39 meters of 153.2 gpt Ag
equivalent or 63.7 gpt Ag and 2.08 % Pb +Zn.
- 76.5 meters of 61 gpt Ag equivalent or 24 gpt Ag and 0.87 % Pb +Zn
- 36 meters of 82 gpt Ag equivalent including 12 meters of 183.9 gpt Ag
equivalent or 125.5 gpt Ag and 1.36 % Pb +Zn.
Details of the 10,000 meter drill program are as follows:
Pit Zone and Area
Hole DH 53
- Grading 234 meters of 146 gpt Ag equivalent or 58 gpt silver 2.06% Pb
- Includes 70 meters of 236.3 Ag equivalent or 91.4 gpt Ag and 3.37 % Pb
+Zn and 27 meters of 338.6 gpt Ag equivalent or 121.7 gpt Ag and 5.50 % Pb
- DH 53 is an infill hole within the resource drilled to better define
the hangwall and footwall contacts and to test the extension of high grade
zones within the resource. It shows significant extensions to the high
grades. For example:
- the internal intercept of 236gpt silver equivalent over 70 meters is a
25 meter step out from KP 25 that hit 100.4 gpt silver and 3.24% Pb+Zn over
97.67 meters within a wider intercept of 62.4 gpt silver and 2.1% Pb +Zn (see
news release dated July 22, 2008) and a 80 meter step out from KP 26 where
87.11 gpt silver and 2.93 % Pb+Zn over 29.90 meters occurs within a wider
lower grade intercept of 36.94 gpt silver and 1.31 % Pb+Zn over 187.8 meters
(see news release dated July 22, 2008).
- Further it indicates good potential for an un-quantified higher grade
domain. This holds potential for upgrading the resource size internally and
may of course have a positive impact on project economics.
- Encountered 92 gpt Ag equivalent over 90 meters or 38 gpt Ag, 1.36 % Pb
+Zn including 39 meters of 153.2 gpt Ag equivalent or 63.7 gpt Ag and 2.08 %
Pb +Zn. Mineralization started at 45 meters.
- PC 48 tested the northeast Pit Resource extension with a 20 meter off
set to the northeast.
- Encountered 36 meters of 82 gpt Ag equivalent or 54 gpt Ag and 0.65% Pb
+Zn including 12 meters of 183.9 gpt Ag equivalent or 125.5 gpt Ag and 1.36 %
Pb +Zn. Mineralization started at 24 meters.
- PC 47 tested the northeast Pit Resource extension with about a 70meter
PC 49 did not reach target depth and bottomed in weakly anomalous
mineralization at 156 meters.
- Intersected 61 gpt Ag equivalent over 76.5 meters or 24 gpt Ag and 0.87
% Pb +Zn. Drilled about 75 meters northeast of the Pit Resource.
PC 51 No significant results.
- Intersected 10.5 meters of 174.2 gpt Ag equivalent or 64.1 gpt Ag and
2.57 % Pb +Zn.
Pit South West Area:
- PC 12 was deepened with core extending the mineralized zone a further
44 meters of hole length for a composited interval of 36 gpt Ag, 0.62 % Pb
and 0.68 % Zn for 92 gpt Ag equivalent over 114.5 meters.
- PC 11 was deepened with core extending the mineralized zone a further
89 meters of hole length for a composited interval of 12 gpt Ag, 0.18 % Pb
and 0.20 % Zn for 28 gpt Ag equivalent over 150 meters.
North East Zone and Trend
PC 30 through PC 38 were drilled along the northeast trend between the
Pit Resource and the North East Zone. These holes did not reach planned
depths with PC 35, 36, and 37 just beginning to enter the target zones. These
targets will be tested with core drilling which has a much higher success
rate at Promontorio. PC 30 to PC34 did not reach target depth, no significant
results. PC 35 did not reach target depth bottoming in anomalous
mineralization at 294 meter depth with the best intercept being 6 meters of
92.4 gpt Ag equivalent or 42.3 gpt silver and 1.16% Pb+Zn. PC 36 did not
reach target depth but bottomed in anomalous mineralization at 264 meters
with the best intercept being 48 meters of 20.6 gpt Ag equivalent or 14 gpt
Ag and .15% Pb +Zn PC 37 bottomed in 12 meters of 93.4 gpt Ag or 38.3 gpt Ag
1.294 % Pb+Zn. PC 38 and PC 29 no significant interval.
Ranch EM Anomaly
Holes PC 39 through to PC 46 were shallow RC holes drilled to test a
peripheral target called the Ranch EM zone. It is outside of the main
mineralized 1.0 kilometer long corridor and was tested to take advantage of
the RC rig before it was released from the project. These holes showed: PC 39
intersected 4.5 meters of 307.7 gpt Ag equivalent or 101.3 gpt silver and 6.3
% Pb+Zn. This was drilled about 80 meters and in the opposite direction of
previously released KP 64 which hit 3.0 meters of 551 gpt Ag and 20.27% Pb +
Zn. PC 40 to 46 hit no significant mineralization.
All holes marked PC were drilled using reverse circulation and marked DH
were drilled with HQ core. RC samples were split using riffle or rotary
splitters to make representative composites. All samples are over 1.5 meter
intervals. Core samples were cut using a core saw at 1 to 2 meter intervals.
All mineralized intercepts are drill hole length drilled across a vertically
inclined breccias system at 60 degree angles. Further Quality Assurance and
Quality Control procedures are posted on the Kootenay Gold website.
The foregoing geological disclosure has also been reviewed and verified
by Kootenay's CEO, James McDonald, P.Geo (a qualified person for the purpose
of National Instrument 43-101, Standards of Disclosure for Mineral Projects).
Mr. McDonald is a director of Kootenay.
Kootenay Gold is actively developing mineral projects in the Sierra Madre
Region of Mexico and in British Columbia, Canada. The Company's flagship
property is the former producing Promontorio Silver mine in Sonora State,
Mexico. The Company's objective is to develop near term discoveries and long
term sustainable growth. Kootenay's management and technical team are proven
professionals with extensive international experience in all aspects of
mineral exploration, operations and venture capital markets. Multiple,
ongoing J/V partnerships in Mexico and Canada maximize potential for
additional, new discoveries while maintaining minimal share dilution.
The TSX Venture Exchange has not reviewed and does not accept
responsibility for the adequacy or the accuracy of this release. Cautionary
Note to US Investors: This news release may contain information about
adjacent properties on which we have no right to explore or mine. We advise
U.S. investors that the SEC's mining guidelines strictly prohibit information
of this type in documents filed with the SEC. U.S. investors are cautioned
that mineral deposits on adjacent properties are not indicative of mineral
deposits on our properties. This news release may contain forward-looking
statements including but not limited to comments regarding the timing and
content of upcoming work programs, geological interpretations, receipt of
property titles, potential mineral recovery processes, etc. Forward-looking
statements address future events and conditions and therefore involve
inherent risks and uncertainties. Actual results may differ materially from
those currently anticipated in such statements. 2011 number 09
For further information:
James McDonald, CEO and President at +1-403-238-6986
Ken Berry, Chairman at +1-604-601-5652; +1-888-601-5650
or visit: www.kootenaygold.ca
Tags: canada, Kootenay Gold Inc., May 31, mexico, Vancouver